Thank you for purchasing our company's products, and for your safety and health, please read the manual carefully before using. RFH-01 Air-tight Chemical Protective Suits produced in our company is strictly detected and is according to the EU standard of BS EN943-1:2002 . The raw materials we use are also detected and is complied to the requirements of the terms in BS EN943-1:2002. RFH-01 Air-tight Chemical Protective Suits is one kind of the fireman suits which is worn when the firemen fight with fire or rescue in the places where there are dangerous chemicals or caustic things and they use this to protect themselves from the possible harm of the chemicals or the caustic things. The main part of the rubberized fabric of RFH-01 Air-tight Chemical Protective Suits uses the silk cloth which is processed by flame-retardant and tackifying methods. Both of its two sides are covered with chemical-protective face-glue. The rubberized fabric only carbonizes but without melting drops and keeps good strength when contacting with fire. The rubberized fabric is made into the main part of the suits and gloves through the process of paste, tailoring, and hot-sealing strip. It can also be made into the whole suits by combining with fire-retardant, voltage resistant, anti-puncture boots or fire-fighting boots. |
2 Main technical parameters (1)The main part of the rubberized fabric The thickness of the rubberized fabric 0.45+0.05mm The tensile strength average of the Longitude and Latitude not less than 450N/5cm The tearing strength average of the Longitude and Latitude not less than 32N The performance of Anti-sour penetration (10mm×1h)(80%H2S04,60%HN03,30%HCL) No penetration The performance of Anti-sour penetration (6.1mo1/LNa0H) No penetration The performance of fire retardant the lasting time of burning not over 2s The time of stopping fire not over 10s the length destroyed not over 10cm Anti-aging caused by hot (125℃×24h)not pitchy, not brittle The performance of anti-coldness (-25℃×5minfolded to 180°)without cracks The performance of anti-petrol (soaked in120#petrol for 30s)no cracks nor pitchy The adherisive strength between the fabric and the glue not less than 0.78KN/M (2)The table below is the performance of fire-fighting boots |