CT-1502 库板组合器 CT-1502

▲      两段式伸缩型，专用于组合式库板的链接器。

▲      发泡前先将六角孔贴住，避免发泡济进入。 将连接器固定前，要注意左右安装高度要对齐对正，更要注意钩仔方向，正常使用钩仔是在库板的右侧。

▲      使用特制加长的M8 六角板手，先将钩仔顺时针方向退到底部，然后将库板靠紧（如左上图），钩子在右侧时应逆时针方向，如钩子在左侧时要顺时钟方向钩住用力锁紧后，库板与库板就会紧密结合。

▲ two-stage telescopic type, is dedicated to the the modular library board linker.Before
▲ foam stick hexagonal hole to avoid foaming economic enter. To secure the connector to pay attention to the left and right mounting height to be aligned more hook earners to pay attention to the direction of normal use hook earners in the right side of the library board.
▲ use specially lengthened M8 hex wrench, retreated to the bottom of the first hook earners clockwise direction, then the library board to try to be (a left upper panel), hook counterclockwise on the right should be, such as a hook on the left the hooked hard locking clockwise, the library board and the library board will be closely integrated.